Manteinance
The importance of painting
Marvic offers his wheels in many colours: from pastel shades to chrome
finish.
The painting is very important for magnesium products, because it is
fundamental for aesthetics, for protection against the weather and
other aggressive substances.
Until the wheels maintain intact the painting, there are not corrosion
problems, so we always recommend the powder paints, because they are
much resistant than other paints.
Naturally the magnesium protection is guaranteed also by a special
treatment against corrosion.
Thanks to this double protection we can guarantee our wheels for two
years from the sales date.
Warranty is not valid if the paint has been removed (by blasting or chemical bath).
Cleaning
Each Marvic wheel, both in aluminium and magnesium, before painting, is treated with special
products against the corrosion. We recommend to clean and wash our wheels only with alcohol free and
non-aggressive detergent in order to avoid damages to the paint and to the alloy.
Installing
 |
Before to install the rotors, the sprocket carriers and other components,
lubricate the bearings and spacer seat.
|
|
Install the special sprocket with Marvic perforation and tight the bolts to 50 Nm
|
|
Install the rotors and tight the bolts to 30 Nm for M8, and to 11Nm for M6
|
Wheels are assembled with air valve, bearings, spaces, dumper rubbers, bots, nuts, flanges, helicoils and other
not available on the market, and it is explicitly not recommended the violation of every components of the wheels.
|
